On January 27, it was learned from Wuhan street lamp management service center that the lighting quality improvement project for the second channel of Wuhan Tianhe Airport was completed on January 28, and the illumination can be automatically adjusted. When the new street lamp is turned on to 1% accuracy, it is enough to start "going on duty"
nearly 100 engineering staff of the municipal street lamp management service center and 10 aerial work vehicles were connected on site at the same time to replace the LED light source for the second channel of Tianhe Airport
citizens who often walk the second channel of Tianhe Airport will feel that the street lamps do not seem to be on when they were just opened. Wuhan Urban Construction Commission said that 1045 sets of street lamps were installed in the second passage of the airport from majiahu interchange to gusaoshu interchange, all of which used a single 400W sodium light source. The average illuminance of the field test was 35lx. Although it reached the national design standard, with the extension of the operation time, the light attenuation was in the normal decreasing process, and the lighting color rendering decreased
nearly 100 engineering personnel and 10 aerial work vehicles of the municipal street lamp management service center are connected on site at the same time to replace the LED light source for the second channel of Tianhe Airport.
as the key welcome support line of the seventh world military games, the second channel of Tianhe Airport can be described as a "gateway". In order to improve the lighting quality of the road and the traffic safety guarantee of rapid traffic, Wuhan street lamp management service center organized experts to conduct on-site inspection and evaluation. According to the expert opinions, it was decided to replace the original sodium light source with the same power LED light source for the second channel of the airport, and install a single lamp control system synchronously, so as to realize adjustable illumination, controllable power, reduced energy consumption, better color rendering and better quality
in order to make the lighting of the second channel of Tianhe Airport look new as soon as possible, nearly 100 engineering personnel and 10 aerial work vehicles from Wuhan street lamp management service center were connected on site at the same time. Changjiang saw at the scene that 1200 street lights have been installed along the whole line. According to the introduction, the illumination of this new street lamp can be automatically adjusted. For example, when the traffic flow in the channel is small at midnight, the illumination can reach 50% of the normal, which is not lower than the national standard, meets the requirements of safe driving, and greatly saves electric energy
nearly 100 engineering personnel of the municipal street lamp management service center and 10 aerial work vehicles are connected on the site at the same time to replace the LED light for the second channel of Tianhe Airport. 6) put the brush on the push rod source
Wuhan Urban Construction Commission said that after the improvement and reconstruction of the functional lighting quality of the second channel of the airport, relevant units are requested to further optimize the main airport road, the north section of the Third Ring Road, Wuhan Avenue, the Second Yangtze River Bridge The functional lighting improvement scheme of Erqi Yangtze River Bridge and related sections such as liang1, ball screw shore connection and Donghu road realizes the overall coordination of the lighting effect of the whole line of important window sections in the city
source: Changjiang mazhenhua correspondent Wang Xin Yu linhui photography/Zhou Chao correspondent Yu linhui Huang Lei